Artificial nail modelling systems in healthcare workers: An emerging risk of contact sensitization to a well-known occupational allergen in an alternative way.

BACKGROUND: Artificial nail modelling systems (ANMS) pose a significant risk for nail stylists and their clients regarding acrylate sensitization, which might jeopardize the use of acrylate-containing medical devices. OBJECTIVES: To evaluate the frequency of artificial nail practices among female healthcare workers (HCWs) compared with controls and assess ANMS-related side effects. METHODS: In this comparative, cross-sectional, single-centre study, a face-to-face interview with 200 female HCWs and 200 age-matched female dermatology patients (controls) was conducted regarding the use of ANMS between March and November 2023. RESULTS: Among 400 participants (median age: 25), 85 (21.3%) have applied ANMS at least once. The prevalence of ANMS application was significantly higher in HCWs (n = 54/200, 27%) compared with controls (n = 31/200, 15.5%) (p < 0.05). Long-lasting nail polish was the most commonly preferred technique (n = 82/85, 96.5%). ANMS were mainly performed in nail studios by nail stylists (n = 79/85, 92.9%), while three participants were using home kits. Nail brittleness was the most frequently reported side effect (n = 19/85, 22.4%). No case of allergic contact dermatitis (ACD) was detected. CONCLUSIONS: The popularity of ANMS among young female HCWs is growing. This striking trend might further put these individuals not only at risk of medical device-related adverse events but also occupational ACD.

2-Hydroxyethyl methacrylate (2-HEMA) sensitization, a global epidemic at its peak in Spain?

BACKGROUND: A global epidemic of allergic contact dermatitis to (meth)acrylates has been described in relation to the widespread use of manicure products. OBJECTIVES: To evaluate the frequency of sensitization to 2-hydroxyethyl methacrylate (2-HEMA) among consecutively patch tested patients with eczema in Spain; the percentage of current relevance; the MOAHLFA index; and, the potential sources of exposure to (meth)acrylates. METHODS: From January 2019 to December 2022, 2-HEMA 2% pet. was prospectively patch tested in 24 REIDAC (Spanish Allergic Contact Dermatitis Registry) centres. RESULTS: Six thousand one hundred thirty-four patients were consecutively patch tested with 2-HEMA 2% pet. 265/6134 (4.3%) were positive. Positive reactions of current relevance were identified to involve 184/265 (69%). The efficiency (number of patch tests needed to detect relevant positive patch test reactions) was 34 (6134/184). The variable 'occupational' was found to be significantly associated with a higher risk for relevant positive reactions to 2-HEMA (OR: 10.9; 95% CI: 8.1-14.9). CONCLUSION: (Meth)acrylate sensitization is a prevalent health issue in Spain. 2-HEMA 2% pet. has been identified to be a highly effective (meth)acrylate allergy marker in the GEIDAC baseline series. The responsible authorities should implement policies guaranteeing accurate labelling of industrial, medical, and consumer materials while ensuring the enforcement of said labelling through appropriate legal means.

Contact allergy to acrylate-containing nail cosmetics: A retrospective 8-year study.

BACKGROUND: Over the last 10 years, allergic contact dermatitis (ACD) from acrylate-containing nail cosmetics (acrylic nails, gel nails, gel nail polish) has been reported repeatedly. OBJECTIVES: To investigate the frequency and clinical features of ACD in nail cosmetics in a university hospital in Amsterdam, The Netherlands. PATIENTS AND METHODS: A retrospective study in patients diagnosed with ACD from acrylate-containing nail cosmetics at the Amsterdam University Medical Centers between January 2015 and August 2023. RESULTS: Sixty-seven patients, all women, were diagnosed with ACD from nail cosmetics, representing 1.6% of all individuals and 2.3% of all women patch tested in this period. Sixty-five of sixty-seven (97%) subjects had a positive patch test to 2-hydroxyethyl methacrylate (HEMA). Forty-nine patients (73%) were consumers and 18 (27%) were professional nail stylists. The sites most frequently affected with dermatitis were the fingers (79%), hands (40%) and the head and/or neck. Avoidance of contact with acrylate-containing products resulted in complete clearing of dermatitis in 80% of patients. CONCLUSIONS: ACD from acrylate-containing nail cosmetics is frequent in women patch tested in Amsterdam. Nearly all were identified by a positive patch test to 2-hydroxyethyl methacrylate in the (meth)acrylate series or the European baseline series.

2-Hydroxyethyl methacrylate (HEMA): A clinical review of contact allergy and allergic contact dermatitis. Part 2. Cross- and co-sensitization, other skin reactions to HEMA, position of HEMA among (meth)acrylates, sensitivity as screening agent, presence of HEMA in commercial products and practical information on patch test procedures.

This is the second part of a literature review of the clinical aspects of contact allergy to and allergic contact dermatitis from 2-hydroxyethyl methacrylate (HEMA). Topics include cross- and co-sensitization, atypical manifestations of contact allergy, frequency of positive patch tests to HEMA compared with other (meth)acrylates, sensitivity of HEMA as a screening agent, the presence of HEMA in commercial products, and practical information on patch testing procedures. Primary sensitization to methacrylates including HEMA may result in methacrylate and acrylate cross-sensitization. There is a strong cross-allergy between HEMA, ethylene glycol dimethacrylate (EGDMA), and hydroxypropyl methacrylate; many reactions to EGDMA are cross-reactions to primary HEMA sensitization. Rare atypical manifestations of HEMA-allergy include lichen planus, lymphomatoid papulosis, systemic contact dermatitis, leukoderma after positive patch tests, and systemic side effects such as nausea, diarrhoea, malaise, and palpitations. The occurrence of respiratory disease caused by methacrylates such as asthma is not infrequent. HEMA is the most frequently patch test-positive methacrylate. It is a good screening agent for allergy to other (meth)acrylates. Patch test sensitization to HEMA 2% pet. is extremely rare. There are (some) indications that HEMA is frequently used in dental products and nail cosmetics.

Presence of 2-hydroxyethyl methacrylate (HEMA) and other (meth)acrylates in nail cosmetics, and compliance with EU legislation: An online market survey.

BACKGROUND: During the last 15-20 years, allergic contact dermatitis from acrylates-containing nail cosmetics (acrylic nails, gel nails, gel nail polish) has been increasingly reported. 2-Hydroxyethyl methacrylate (HEMA) is considered to be the major allergenic culprit; few data on its presence in nail cosmetics are available. OBJECTIVES: To investigate (1) the frequency in which HEMA and di-HEMA trimethylhexyl dicarbamate are present in nail cosmetics; (2) whether nail cosmetics comply with EU regulations; (3) which other (meth)acrylates are present in nail cosmetics and how often. METHODS: One-line market survey. RESULTS: HEMA was present in nearly 60% of 394 cosmetic nail products and di-HEMA trimethylhexyl dicarbamate in 34%. Mandatory warnings on the packages of products containing HEMA were absent in 35% ('For professional use only') resp. 55% ('Can cause an allergic reaction'). Forty-five other (meth)acrylates were identified, of which the most frequent were hydroxypropyl methacrylate (25%), isobornyl methacrylate (16%) and trimethylolpropane triacrylate (12%). Some ingredient lists mentioned non-INCI names or non-specific names. CONCLUSIONS: HEMA was by far the most common ingredient of nail cosmetics, being present in nearly 60% of the products. Violations of EU legislation occurred in >30% (mandatory warnings missing) resp. 10% (mislabelling) of nail cosmetics.

Results of patch testing 2-hydroxyethyl methacrylate (HEMA) in the European baseline series: A 4-year retrospective study.

BACKGROUND: 2-Hydroxyethyl methacrylate (HEMA) was added to the European baseline series (EBS) in 2019. Few recent data are available on the frequency and relevance of positive reactions to this hapten. OBJECTIVES: To investigate the frequency and relevance of positive patch tests to HEMA in the EBS in a university hospital in Amsterdam, The Netherlands. PATIENTS AND METHODS: Retrospective study in patients with positive patch tests to HEMA investigated between June 2019 and August 2023. RESULTS: Of 2927 consecutive patients, 88 (79 women and 9 men; 3.0%) had a positive reaction to HEMA. The prevalence in women was 3.9%, in men 1.0%. Forty-three (49%) reactions were judged to be of current clinical relevance and 21 (24%) of past relevance. In this group of 64 patients with relevant reactions, 18 (28%) had occupational contact with (meth)acrylate-containing products, of who 11 (61%) were nail stylists. In 46 patients with non-occupational allergic contact dermatitis, 31 (67%) had allergic reactions to nail cosmetics. Glues and glue-containing products accounted for 22% of the materials causing allergic contact dermatitis and dental products for 8%. CONCLUSIONS: Allergic reactions to HEMA are very frequent in women investigated in Amsterdam. Nearly two thirds of cases were caused by nail cosmetics.

Phase Transition Behaviors of Poly(N-isopropylacrylamide) Nanogels with Different Compositions Induced by (-)-Epigallocatechin-3-gallate and Ethyl Gallate.

Phase transition behaviors of poly(N-isopropylacrylamide) nanogels with different compositions induced by (-)-epigallocatechin-3-gallate (EGCG) and ethyl gallate (EG) has been investigated systematically. Monodisperse poly(N-isopropylacrylamide-co-N-hydroxymethyl acrylamide) (P(NIPAM-co-NMAM)) and poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate) (P(NIPAM-co-HEMA)) nanogels with different feeding monomer ratios were prepared by emulsion polymerization. P(NIPAM-co-NMAM) nanogels exhibit rapid isothermal phase transition behavior in EGCG solutions with low concentration (10-3 mol/L) in less than 10 minutes. The thermosensitive phase transition behaviors of nanogels are affected not only by the copolymerized monomers but also by the concentrations of EGCG and EG in aqueous solutions. Nanogels remain in a shrunken state and do not exhibit thermosensitive phase transition behaviors in EGCG solutions (≥5 mmol/L), whereas they display thermo-responsive phase transition behaviors in EG solutions. The volume phase transition temperature (VPTT) shifts to lower temperatures with increasing EG concentration. The diameters of P(NIPAM-co-NMAM) nanogels decrease with increasing EG concentration at temperatures between 29 and 33 °C. In contrast, the diameters of P(NIPAM-co-HEMA) nanogels increase with increasing EGCG concentration at temperatures between 37 and 45 °C. The results demonstrate the potential of nanogels for simple detection of EG and EGCG concentrations in aqueous solutions over a wide temperature range, and EGCG can serve as a signal for the burst-release of drugs from the P(NIPAM-co-NMAM)-based carriers at physiological temperature.

Dual-Setting Bone Cement Based On Magnesium Phosphate Modified with Glycol Methacrylate Designed for Biomedical Applications.

Magnesium phosphate cement (MPC) is a suitable alternative for the currently used calcium phosphates, owing to beneficial properties like favorable resorption rate, fast hardening, and higher compressive strength. However, due to insufficient mechanical properties and high brittleness, further improvement is still expected. In this paper, we reported the preparation of a novel type of dual-setting cement based on MPC with poly(2-hydroxyethyl methacrylate) (pHEMA). The aim of our study was to evaluate the effect of HEMA addition, especially its concentration and premix time, on the selected properties of the composite. Several beneficial effects were found: better formability, shortened setting time, and improvement of mechanical strengths. The developed cements were hardening in ∼16-21 min, consisted of well-crystallized phases and polymerized HEMA, had porosity between ∼2-11%, degraded slowly by ∼0.1-4%/18 days, their wettability was ∼20-30°, they showed compressive and bending strength between ∼45-73 and 13-20 MPa, respectively, and, finally, their Young's Modulus was close to ∼2.5-3.0 GPa. The results showed that the optimal cement composition is MPC+15%HEMA and 4 min of polymer premixing time. Overall, our research suggested that this developed cement may be used in various biomedical applications.

N-acetyl cysteine inhibits IL-1α release from murine keratinocytes induced by 2-hydroxyethyl methacrylate.

The hydrophilic compound 2-hydroxyethyl methacrylate (HEMA) is a major component of dental bonding materials, and it enhances the binding of resin-composites to biomolecules. However, HEMA is a well-known contact sensitizer. We reported previously that intradermal injection of HEMA induces the production of IL-1 locally in the skin. Keratinocytes are the first barrier against chemical insults and constitutively express IL-1α. In this study, we analyzed whether HEMA induces the production of inflammatory cytokines from murine keratinocyte cell line Pam212 cells. We demonstrated that HEMA induced the release of 17-kDa mature IL-1α and caused cytotoxicity. The activity of calpain, an IL-1α processing enzyme, was significantly higher in HEMA-treated cells. The thiol-containing antioxidant N-acetyl cysteine (NAC) inhibited HEMA-induced IL-1α release but not cytotoxicity. NAC inhibited intracellular calpain activity and reactive oxygen species (ROS) production induced by HEMA. NAC post-treatment also inhibited IL-1α release and intracellular ROS production induced by HEMA. Furthermore, HEMA-induced in vivo inflammation also inhibited by NAC. NAC inhibited polymerization of HEMA through adduct formation via sulfide bonds between the thiol group of NAC and the reactive double bond of HEMA. HEMA-induced IL-1α release and cytotoxicity were also inhibited if HEMA and NAC were pre-incubated before adding to the cells. These results suggested that NAC inhibited IL-1α release through decreases in intracellular ROS and the adduct formation with HEMA. We concluded that HEMA induces IL-1α release from skin keratinocytes, and NAC may be a promising candidate as a therapeutic agent against inflammation induced by HEMA.

Methacrylate Ester Monomers.

The Expert Panel for Cosmetic Ingredient Safety reviewed newly available studies since their original assessment in 2005, along with updated information regarding product types and concentrations of use, and confirmed that these 22 methacrylate ester monomers are safe as used in nail enhancement products in the practices of use and concentration as described in this report, when skin contact is avoided.

Porous Poly(2-hydroxyethyl methacrylate) Hydrogel Scaffolds for Tissue Engineering: Influence of Crosslinking Systems and Silk Sericin Concentration on Scaffold Properties.

Tailored porous structures of poly(2-hydroxyethyl methacrylate) (PHEMA) and silk sericin (SS) were used to create porous hydrogel scaffolds using two distinct crosslinking systems. These structures were designed to closely mimic the porous nature of the native extracellular matrix. Conventional free radical polymerization of 2-hydroxyethyl methacrylate (HEMA) was performed in the presence of different concentrations of SS (1.25, 2.50, 5.00% w/v) with two crosslinking systems. A chemical crosslinking system with N'N-methylene bisacrylamide (MBAAm) and a physical crosslinking system with dimethylurea (DMU) were used: C-PHEMA/SS (crosslinked using MBAAm) and C-PHEMA/pC-SS (crosslinked using MBAAm and DMU). The focus of this study was on investigating the impact of these crosslinking methods on various properties of the scaffolds, including pore size, pore characteristics, polymerization time, morphology, molecular interaction, in vitro degradation, thermal properties, and in vitro cytotoxicity. The various crosslinked networks were found to appreciably influence the properties of the scaffolds, especially the pore sizes, in which smaller sizes and higher numbers of pores with high regularity were seen in C-PHEMA/1.25 pC-SS (17 ± 2 µm) than in C-PHEMA/1.25 SS (34 ± 3 µm). Semi-interpenetrating networks were created by crosslinking PHEMA-MBAAm-PHEMA while incorporating free protein molecules of SS within the networks. The additional crosslinking step involving DMU occurred through hydrogen bonding of the -C=O and -N-H groups with the SS, resulting in the simultaneous incorporation of DMU and SS within the PHEMA networks. As a consequence of this process, the scaffold C-PHEMA/pC-SS exhibited smaller pore sizes compared to scaffolds without DMU crosslinking. Moreover, the incorporation of higher loadings of SS led to even smaller pore sizes. Additionally, the gelation time of C-PHEMA/pC-SS was delayed due to the presence of DMU in the crosslinking system. Both porous hydrogel scaffolds, C-PHEMA/pC-SS and PHEMA, were found to be non-cytotoxic to the normal human skin dermal fibroblast cell line (NHDF cells). This promising result indicates that these hydrogel scaffolds have potential for use in tissue engineering applications.

2-Hydroxyethyl methacrylate (HEMA): A clinical review of contact allergy and allergic contact dermatitis-Part 1. Introduction, epidemiology, case series and case reports.

2-Hydroxyethyl methacrylate (HEMA) has been increasingly recognised as a contact allergen and was added to the European baseline series in 2019. In this article (2 parts), the results of an extensive literature review of the clinical aspects of contact allergy/allergic contact dermatitis to HEMA are presented. In part 1, the epidemiology of HEMA contact allergy is discussed and detailed information on published case series and case reports presented. HEMA is an important cause of contact allergy/allergic contact dermatitis in North America and Europe with recent prevalences of >3% in the USA + Canada and 1.5%-3.7% in Europe. Currently, most cases are caused by nail cosmetics, both in consumers and professional nail stylists. In our literature review, we have found 24 studies presenting case series of patients with allergic contact dermatitis attributed to HEMA and 168 case reports. However, the presence of HEMA in the products causing ACD was established in only a minority. Part 2 will discuss cross- and co-sensitisation, and other skin reactions to HEMA, will assess whether HEMA is the most frequent (meth)acrylate allergen and how sensitive HEMA as a screening agent is, investigate the presence of HEMA in commercial products and provide practical information on patch testing procedures.

Superhydrophilic Poly(2-hydroxyethyl methacrylate) Hydrogel with Nanosilica Covalent Coating: A Promising Contact Lens Material for Resisting Tear Protein Deposition and Bacterial Adhesion.

Tear protein deposition and bacterial adhesion are the main drawbacks of the hydrogel contact lens. In this study, we developed a novel superhydrophilic poly(2-hydroxyethyl methacrylate) (NSCC-pHEMA) hydrogel with nanosilica covalent coating by the combination of colloidal silica immersion and dehydration treatment. The infrared spectroscopy and energy dispersive X-ray spectroscopy analyses confirmed the successful formation of Si-O covalent bonding between nanosilica and pHEMA hydrogel. This coating was highly stable against powerful sonication or long-term shaking immersion treatment. Among various NSCC-pHEMA hydrogels with different colloidal silica concentrations, the 7%NSCC-pHEMA hydrogel generated a superhydrophilic micro wrinkle surface with a root-mean-square roughness of 43.10 nm, which dramatically reduced the deposition of lysozyme and bovine serum albumin by 65% and 57%, respectively, and decreased the adhesion of S. aureus and E. coli by 59% and 66%, respectively, in comparison to the pHEMA hydrogel. However, the nanosilica coating had little effect on the mechanical properties, light transmittance, oxygen permeability, and equilibrium water content of the pHEMA hydrogel. NSCC-pHEMA hydrogels were nontoxic to both mouse fibroblasts (L929) and human immortalized keratinocytes (HaCaT). Thus, the superhydrophilic NSCC-pHEMA hydrogel is a potential contact lens material for resisting tear protein deposition and bacterial adhesion.

Synthesis and Evaluation of Antifungal and Antibacterial Abilities of Carbon Nanotubes Grafted to Poly(2-hydroxyethyl methacrylate) Nanocomposites.

Developing nanomaterials with the capacity to restrict the growth of bacteria and fungus is of current interest. In this study, nanocomposites of poly(2-hydroxyethyl methacrylate) (PHEMA) and carbon nanotubes (CNTs) functionalized with primary amine, hydroxyl, and carboxyl groups were prepared and characterized. An analysis by Fourier-transform infrared (FT-IR) spectroscopy showed that PHEMA chains were grafted to the functionalized CNTs. X-ray photoelectron spectroscopy suggested that the grafting reaction was viable. The morphology of the prepared nanocomposites studied by field-emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) showed significant changes with respect to the observed for pure PHEMA. The thermal behavior of the nanocomposites studied by differential scanning calorimetry (DSC) revealed that the functionalized CNTs strongly affect the mobility of the PHEMA chains. Tests carried out by thermogravimetric analysis (TGA) were used to calculate the degree of grafting of the PHEMA chains. The ability of the prepared nanocomposites to inhibit the growth of the fungus Candida albicans and the bacteria Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli was evaluated. A reduced antifungal and antibacterial capacity of the prepared nanocomposites was determined.

Effects of Grafting Degree on the Formation of Waterborne Polyurethane-Acrylate Film with Hard Core-Soft Shell Structure.

Waterborne polyurethane-acrylate (WPUA) grafted with polyurethane was prepared to improve the film-forming ability of hard-type acrylic latex. To balance the film-formation ability and hardness, the WPUA latex was designed with a hard core (polyacrylate) and soft shell (polyurethane). The grafting ratio was controlled through varying the content of 2-hydroxyethyl methacrylate (HEMA) used to cap the ends of the polyurethane prepolymer. The morphologies of the latex particles, film surface, and fracture surface of the film were characterized through transmission electron microscopy, atomic force microscopy, and scanning electron microscopy, respectively. An increase in the grafting ratio resulted in the enhanced miscibility of polyurethane and polyacrylate but reduced adhesion between particles and increased minimum film formation temperature. In addition, grafting was essential to obtain transparent WPUA films. Excessive grafting induced defects such as micropores within the film, leading to the decreased hardness and adhesive strength of the film. The optimal HEMA content for the preparation of a WPUA coating with excellent film-forming ability and high hardness in ambient conditions was noted to be 50%. The final WPUA film was prepared without coalescence agents that generate volatile organic compounds.

Polysaccharides in contact lenses: From additives to bulk materials.

As the number of applications has increased, so has the demand for contact lenses comfort. Adding polysaccharides to lenses is a popular way to enhance comfort for wearers. However, this may also compromise some lens properties. It is still unclear how to balance the variation of individual lens parameters in the design of contact lenses containing polysaccharides. This review provides a comprehensive overview of how polysaccharide addition impacts lens wear parameters, such as water content, oxygen permeability, surface wettability, protein deposition, and light transmittance. It also examines how various factors, such as polysaccharide type, molecular weight, amount, and mode of incorporation into lenses modulate these effects. Polysaccharide addition can improve some wear parameters while reducing others depending on the specific conditions. The optimal method, type, and amount of added polysaccharides depend on the trade-off between various lens parameters and wear requirements. Simultaneously, polysaccharide-based contact lenses may be a promising option for biodegradable contact lenses as concerns regarding environmental risks associated with contact lens degradation continue to increase. It is hoped that this review will shed light on the rational use of polysaccharides in contact lenses to make personalized lenses more accessible.

One-pot synthesis of nitrogen-doped carbonized polymer dots with tunable emission for multicolor light-emitting diodes.

Carbonized polymer dots (CPDs) have highly potential application value in the field of optoelectronic devices due to their preferable stability, excellent optical properties and low cost. Here, the nitrogen-doped carbonized polymer dots (HNCDs) with self-quenching-resistant fluorescence were prepared via a simple solvothermal method with citric acid, urea and 2-hydroxyethyl methacrylate (HEMA) as raw materials. The structure and optical properties of the HNCDs have been explored in detail by various contrast experiments. The results show that HEMA form the poly(HEMA) to modify on the surface of carbonized core, which can overcome the quenching effect of carbonized core. The nitrogen doping is crucial for the red shift emission of solid-state HNCDs. Furthermore, the HNCDs exhibit concentration-dependent emission and excellent compatibility with silicone sol, which lead to their emission red shifted from blue to red with increasing concentration. The HNCDs were further applied to construct the light-emitting diodes (LEDs), and the multicolor LEDs ranging from blue to red can be prepared by simply varying the type of chips and adjusting the concentration of HNCDs in encapsulating material.

Tailoring the Electron Trapping Effect of a Biocompatible Triboelectric Hydrogel by Graphene Oxide Incorporation towards Self-Powered Medical Electronics.

Triboelectric nanogenerators (TENGs) are associated with several drawbacks that limit their application in the biomedical field, including toxicity, thrombogenicity, and poor performance in the presence of fluids. By proposing the use of a hemo/biocompatible hydrogel, poly(2-hydroxyethyl methacrylate) (pHEMA), this study bypasses these barriers. In contact-separation mode, using polytetrafluoroethylene (PTFE) as a reference, pHEMA generates an output of 100.0 V, under an open circuit, 4.7 µA, and 0.68 W/m2 for an internal resistance of 10 MΩ. Our findings unveil that graphene oxide (GO) can be used to tune pHEMA's triboelectric properties in a concentration-dependent manner. At the lowest measured concentration (0.2% GO), the generated outputs increase to 194.5 V, 5.3 µA, and 1.28 W/m2 due to the observed increase in pHEMA's surface roughness, which expands the contact area. Triboelectric performance starts to decrease as GO concentration increases, plateauing at 11% volumetric, where the output is 51 V, 1.76 µA, and 0.17 W/m2 less than pHEMA's. Increases in internal resistance, from 14 ΩM to greater than 470 ΩM, ζ-potential, from -7.3 to -0.4 mV, and open-circuit characteristic charge decay periods, from 90 to 120 ms, are all observed in conjunction with this phenomenon, which points to GO function as an electron trapping site in pHEMA's matrix. All of the composites can charge a 10 µF capacitor in 200 s, producing a voltage between 0.25 and 3.5 V and allowing the operation of at least 20 LEDs. The triboelectric output was largely steady throughout the 3.33 h durability test. Voltage decreases by 38% due to contact-separation frequency, whereas current increases by 77%. In terms of pressure, it appears to have little effect on voltage but boosts current output by 42%. Finally, pHEMA and pHEMA/GO extracts were cytocompatible toward fibroblasts. According to these results, pHEMA has a significant potential to function as a biomaterial to create bio/hemocompatible TENGs and GO to precisely control its triboelectric outputs.

2-Hydroxyethyl Methacrylate/Gelatin/Alginate Scaffolds Reinforced with Nano TiO2 as a Promising Curcumin Release Platform.

The idea of this study was to create a new scaffolding system based on 2-hydroxyethyl methacrylate, gelatin, and alginate that contains titanium(IV) oxide nanoparticles as a platform for the controlled release of the bioactive agent curcumin. The innovative strategy to develop hybrid scaffolds was the modified porogenation method. The effect of the scaffold composition on the chemical, morphology, porosity, mechanical, hydrophilicity, swelling, degradation, biocompatibility, loading, and release features of hybrid scaffolds was evaluated. A porous structure with interconnected pores in the range of 52.33-65.76%, favorable swelling capacity, fully hydrophilic surfaces, degradability to 45% for 6 months, curcumin loading efficiency above 96%, and favorable controlled release profiles were obtained. By applying four kinetic models of release, valuable parameters were obtained for the curcumin/PHEMA/gelatin/alginate/TiO2 release platform. Cytotoxicity test results depend on the composition of the scaffolds and showed satisfactory cell growth with visible cell accumulation on the hybrid surfaces. The constructed hybrid scaffolds have suitable high-performance properties, suggesting potential for further in vivo and clinical studies.

Preparation and Characterization of Poly(vinyl acetate-co-2-hydroxyethyl methacrylate) and In Vitro Application as Contact Lens for Acyclovir Delivery.

A series of poly(vinyl acetate-co-2-hydroxyethylmethacrylate)/acyclovir drug carrier systems (HEMAVAC) containing different acyclovir contents was prepared through bulk free radical polymerization of 2-hydroxyethyl methacrylate with vinyl acetate (VAc) in presence of acyclovir (ACVR) as the drug using a LED lamp in presence of camphorquinone as the photoinitiator. The structure of the drug carrier system was confirmed by FTIR and 1HNMR analysis, and the uniform dispersion of the drug particles in the carrier was proved by DSC and XRD analysis. The study of the physico-chemical properties of the prepared materials, such as the transparency, swelling capacity, wettability and optical refraction, was carried out by UV-visible analysis, a swelling test and measurement of the contact angle and the refractive index, respectively. The elastic modulus and the yield strength of the wet prepared materials were examined by dynamic mechanical analysis. The cytotoxicity of the prepared materials and cell adhesion on these systems were studied by LDH assay and the MTT test, respectively. The results obtained were comparable to those of standard lenses with a transparency of 76.90-89.51%, a swelling capacity of 42.23-81.80% by weight, a wettability of 75.95-89.04°, a refractive index of 1.4301-1.4526 and a modulus of elasticity of 0.67-1.50 MPa, depending on the ACVR content. It was also shown that these materials exhibit no significant cytotoxicity; on the other hand, they show significant cell adhesion. The in vitro dynamic release of ACVR in water revealed that the HEMAVAC drug carrier can consistently deliver uniformly adequate amounts of ACVR (5.04-36 wt%) over a long period (7 days) in two steps. It was also found that the solubility of ACVR obtained from the release process was improved by 1.4 times that obtained by direct solubility of the drug in powder form at the same temperature.